Filter
Top Products
When the high beams
are on, this blue
indicator light
on
the
instrument panel also
Windshield Wipers
I
will be
on.
You control
the
windshield wipers by
turning the band with
the wiper symbol on
it.
For a single wiping cycle, turn the band to MIST. Hold
it
there until the
wipers start, then let go. The wipers will stop after one wipe. If
you
want
more wipes, hold the band
on
MIST longer.
You can set the wiper speed for a long
or
short delay between wipes. This
can be very useful in light rain or snow. Turn
the
band
to
choose
the
delay
time. The closer to
LO,
the shorter
the
delay.
For steady wiping at low speed, turn the band away from
you
to the
LO
position. For high speed wiping,
turn
the
band further,
to
HI.
To
stop the
wipers, move the band
to
the off symbol.
Remember that worn or damaged wiper blades may prevent you from
seeing well enough
to
drive safely.
To
avoid damage, be sure
to
clear ice
and snow from the wiper blades before using them. If they're frozen to the
windshield, carefully loosen
or
thaw them. If your blades
do
become worn
or damaged, get new blades or blade inserts.
2-32