I
Maintenance Schedule II
30,000
Miles
(50
000
km)
0
Change engine oil and filter (or every 12 months, whichever occurs
first).
An
Emission Control Service.
0
Lubricate the front suspension, ball joints and king pin bushings,
steering linkage and transfer case shift linkage, parking brake cable
guides, and brake pedal springs at every oil change (or every
12
months, whichever occurs first).
0
Check readfront axle fluid
level
and add fluid as needed. Check
constant velocity joints and axle seals
for
leaking.**
For 2-Wheel Drive vehicles only: Clean
and
repack the front wheel
0
Drain, flush and refill cooling system (or every
24
months, whichever
bearings (or at each brake relining, whichever occurs first).
occurs first). See “Engine Coolant’’
in
the Index for what
to
use.
Inspect hoses. Clean radiator, condenser, pressure cap and neck.
Pressure test the cooling system and pressure cap.
An
Emission
Control Service.
Replace spark plugs.
An Emission Control Service.
0
Replace fuel filter.
An Emission Control Service.
-f-
0
Replace air cleaner filter.
An Emission Control Service.
37,500
Miles
(62
500
km)
0
Change engine oil and filter (or every
12
months, whichever occurs
0
Lubricate the front suspension, ball joints and king pin bushings,
first).
An
Emission Control Service.
steering linkage and transfer case shift linkage, parking brake cable
guides, and brake pedal springs at every oil change (or every 12
months, whichever occurs first).
(Continued)
7-28