Filter
Top Products
A
green arrow
on
the
instrument panel will
flash
in
the direction
of the turn or lane
change.
To
signal a lane change, just raise or lower the lever until the green arrow
starts to flash. Hold it there until
you
complete your lane change. The lever
will return by itself when
you
release it.
As
you
signal a turn or a lane change,
if
the
arrows don’t flash but just stay
on, a signal bulb may be burned out and other drivers won’t see your turn
signal.
If
a bulb is burned out, replace it
to
help avoid an accident.
If
the green
arrows don’t go
on
at all when you signal a turn, check the fuse
(see
“Fuses”
in
the
Index) and for burned-out bulbs.
If
you have a trailer towing option with added wiring for the trailer lights, a
different turn signal flasher is used. With this flasher installed, the signal
indicator will flash even if a turn signal bulb
is
burned out. Check the front
and rear turn signal lights regularly
to
make sure they are working.
Headlamp High-Low Beam
f
,.
To
change the
headlamps from low
beam to high or high
to
low, pull the turn
signal lever all the
way toward you. Then
release it.
2-31