Filter
Top Products
SCAN
-
Press the SCAN button to hear each station for
a
few seconds.
Push it again when
you
reach the station you want
to
listen to and the radio
will stop scanning. “SCAN” appears in the display.
Pushbuttons
-
The
four pushbuttons let you return to favorite stations. To
set the pushbuttons for up to fourteen favorite stations
(7
AM
and
7
FM):
1.
Tune
in
the desired station.
2.
Press the SET button.
“SET”
appears
in
the display.
3.
Within
5
seconds, press one
of
the
four pushbuttons to store the station.
Whenever you press that button, the preset station will return.
Repeat these steps for each pushbutton.
In addition to the four stations set as above,
up
to three additional stations
may be preset on each band by pressing
two
adjoining buttons at the same
time. Then do the following:
1.
Tune in the desired station.
2.
Press the SET button. “SET” appears
in
the display momentarily.
3.
Within
5
seconds, press any two adjoining pushbuttons at the same time.
(The station will return when
the
same two buttons are pressed again.)
TREBLE
-
Slide the TREBLE lever up to increase the treble response. If
a
station is weak or noisy, slide the TREBLE lever down
to
reduce the noise.
BASS
-
Slide the BASS lever up to increase
the
bass response. Adjust
the
BASS lever
to
give
a
pleasing sound to your ear.
How
to Operate Your
ETW
A
M-FM
Stereo
Audio
Cassette System
This
part tells
you
how your ETR@
AM-FM
stereo
audio
cassette system
works.
3-9