Chevrolet STFF7S Automobile User Manual


 
If the disc player is very
hot,
or
if you’re driving
on
a
very rough road, a
disc may come out or just
not
play.
If
you
see
the word HOT
on
the display,
the disc player is
too
hot
to
play
the
disc. Press
RCL
to
make the word HOT
go
off
the display.
When things get back to normal, the disc should play again. If the disc
comes back out, check whether:
The disc is upside down.
It is dirty, scratched,
or
wet.
Too
much moisture is
in
the air. (If there is, wait about one hour and try
again.)
RCL
-
Press RCL to see what track is playing. Press
it
again within
5
seconds to
see
how long it
has
been playing. The track number also appears
when you change the volume or when a new track starts to play.
COMP
-
Press
the
COMP button
to
make
soft
and loud passages more
nearly equal in volume. “COMP” will appear in the display while using this
control.
RDM
-
The RDM button means random and when it
is
pressed, it causes
the CD mechanism to play the tracks in a random order rather than in the
sequential
1,
2’3
order. “RDM” will appear in the display while using this
control.
To
return to normal sequence, press RDM again.
REV
-
Press and hold the REV button
to
quickly return
to
a favorite
passage. Release it to display the passage. The counter reading will be
displayed while using this control.
FWD
-
Press and hold the
FWD
button
to
advance quickly within a track.
Release it to resume playing. Watch the display
to
stop at a specific passage.
SCAN
-
Press SCAN to sample each track for approximately
10
seconds.
Scanning will continue until the RDM, SCAN
or
any other motion button is
pressed again.
PREV
-
Hold the PREV
(4
SEEK) button, or press it more than
once,
and
the
disc will return
to
previous tracks.
NEXT
-
Press NEXT (SEEK
,)
to hear the next track now instead
of
waiting until the present track is finished. If you hold this button or press it
more than once, the disc will advance further.
ST-PL
-
Press ST-PL (Stop-Play) to make the disc stop and the radio
play. Press ST-PL again to restart the disc at the point where it stopped.
Press PWR or turn the ignition key
off
to
stop the disc player. The disc stays
in the player and will resume playing at the point where it stopped.
Press EJCT to eject the disc and make
the
radio play. The disc will start at
track
1
when you reinsert
it.
3-16