Filter
Top Products
6.
Put the heater duct over the engine cover studs. Push up on the duct
gently
until
it
snaps into place.
7.
Reconnect the electrical connector for the cigarette lighter.
8.
Grasp the bottom of the instrument panel extension and install the top
into the groove first. Then, push the bottom
of
the extension into place.
9.
Install the two nuts and two screws on the extension.
Air
Cleaner
If you have the
4.3L
engine
(VIN
Code
W)
with the rectangular air cleaner,
you
can change
the
air cleaner filter without removing the engine cover. Just
lift the hood, unsnap both clips and remove
the
top. After changing the
filter, snap both clips to secure
the
air cleaner. Be sure air cleaner lid is
correctly positioned to seal out dust and contaminants that are harmful to
your engine.
Make sure the fresh air hose is
still
attached after the filter
is
changed.
Refer to the Maintenance Schedule to determine when to replace the air
filter.
See “Scheduled Maintenance Services”
in
the Index.
6-17