Filter
Top Products
Checking Your Restraint Systems
Now and then, make sure all your belts, buckles, latch plates, retractors,
anchorages and reminder systems are working properly.
Look
for any other
loose or damaged restraint system parts. If you see anything that might keep
a restraint system from doing its job, have it repaired.
Torn or frayed belts may not protect you in a crash. They can rip apart under
impact forces. If a belt
is
torn or frayed, get a new one right away.
Replacing Seat and Restraint System Parts
After a Crash
If you’ve had a crash,
do
you need new belts?
After a very minor collision, nothing may be necessary. But if the belts were
stretched, as they would be if worn during a more severe crash, then you
need new belts.
If
belts are cut or damaged, replace them. Collision damage also may mean
you will need
to
have safety belt or seat parts repaired or replaced. New
parts and repairs may be necessary even if the belt wasn’t being used at the
time of the collision.
Before replacing any safety belt, see your dealer for the correct part number.
You’ll need the model year and model number for your vehicle. The model
year is on your title and registration. And you can find the model number
on
the Certificatioflire label of your vehicle. See “Certificatioflire Label” in
the Index.
.,”.
The model number
on
the replacement belt must be listed
on
the safety belt
you want
to
replace. Pull the shoulder belt all the way out to see this label.
1-42