Filter
Top Products
How
to
Operate
Your
ETP
AM
Radio
This part tells
you
how your ETR@AM radio works.
Upper Knob
(VOL-RECALL)
-
The upper knob has these four functions:
0
Turn
it
to switch the system on and off.
0
Turn
it
to control the volume.
0
Press
it
to display the time when the ignition is off.
0
Press
it
to change between the clock and the radio station frequency
displayed
when
the radio
is
on.
BAL (Balance)
-
The control ring behind the upper knob adjusts the
left/right speaker
b.
cl
1
ance.
Lower Knob (TUNE)
-
Turn the lower knob to tune
in
radio stations.
Pushbuttons
-
The four pushbuttons let you return
to
favorite stations.
To
set
the pushbuttons for up to fourteen favorite stations
(7
AM and
7
FM):
1.
Tune
in
the desired station.
2.
Press the SET button. “SET” appears
in
the display.
3.
Within
5
seconds, press one of the four pushbuttons to store the station.
Whenever you press that button,
the
preset station will return.
Repeat these steps for each pushbutton.
In addition
to
the four stations set
as
above, up to three additional stations
may be preset on each band by pressing two adjoining buttons at the same
time. Then do the following:
1.
Tune
in
the desired station.
2.
Press the SET button. “SET” appears
in
the display momentarily.
3.
Within
5
seconds. press any two adjoining pushbuttons at the same time.
(The station
will
return when the same two buttons are pressed again.)
3-7