Filter
Top Products
Security Feedback
Security Feedback provides audible and/or visible
feedback that a remote keyless entry lock or unlock
command has been received and executed. Your
vehicle’s ignition must be off for this feature to work.
You may select one of four operating modes for
reception
of
a lock command. You may also select one
of
four operating modes for reception of an unlock
command. The selection and programming of the lock
and unlock operating modes are independent of each
other. The following modes are available for either lock
or
unlock verification:
Mode
1
:
No
Verification
Mode
2:
Horn Chirp only
Mode
3:
Headlamp Flash only
Mode
4:
Horn Chirp and Headlamp Flash
The operating mode
of
the Security Feedback lock
function will be changed when you perform the following
sequence with your vehicle’s doors closed and the ignition
key in
RUN:
Press and hold the power’door lock switch. While
holding the door lock switch, press and release the
remote keyless entry
(RKE)
transmitter lock switch.
This will initialize the customization mode. While in the
customization mode, the chime will sound the number
of
chimes corresponding to the current Security
Feedback lock mode. Each additional press of the
RKE
transmitter lock switch will cause your vehicle to
advance the lock mode by one, starting from the current
Security Feedback lock mode. If cycled beyond lock
Mode
4,
the vehicle will enter lock Mode
1.
During this
procedure, the chime will sound the number
of
chimes
corresponding
to
the current lock mode, providing you
with feedback. When the door lock switch is released,
the vehicle will remain in the most recent lock mode.
The operating mode
of
the Security Feedback unlock
function will
be
changed when you perform the
following sequence with your vehicle’s doors closed and
the ignition key in
RUN:
Press and hold the power door unlock switch. While
holding the door unlock switch, press and release the
RKE
transmitter unlock switch. This will initialize the
customization mode. While in the customization mode, the
chime will sound the number
of
chimes corresponding to
the current unlock mode. Each additional press of the
RKE
transmitter unlock switch will cause your vehicle to
advance the unlock mode by one, starting from the current
unlock mode. If cycled beyond unlock Mode
4,
the vehicle
will enter unlock Mode
1.
During this procedure, the
chime will sound the number
of
chimes corresponding
to
2-11