Filter
Top Products
Back-up Lamp
The back-up lamps are located in the trunk lid
applique. (Refer to the trunk lid applique removal
procedure earlier in this section for graphic and
further instructions.)
1.
Remove the trunk lid applique.
2.
Twist and pull the back-up lamp socket from the
trunk lid applique.
3.
Twist and pull the bulb from the back-up
To install the new bulb:
lamp socket.
1.
Twist and push the bulb into the back-up
2.
Twist and push the back-up lamp socket into the
3.
Reinstall the trunk lid applique.
lamp socket.
trunk lid applique.
Dome Lamp
1.
Grasp the front center and rear center positions
of the dome lamp housing and squeeze together
until the housing releases from the base plate.
A
flat-bladed screwdriver may be necessary
to
pry the
assembly loose.
6-35