Filter
Top Products
Adjusting
the
Speakers
BAL:
Press this knob lightly
so
it extends. Turn the
knob to move the sound
to
the left or right speakers.
The middle position balances the sound between
the speakers.
FADE:
Press this knob lightly
so
it extends. Turn the
knob
to
move the sound to the front or rear speakers.
The middle position balances the sound between
the speakers.
Push these knobs back into their stored positions when
you’re not using them.
Playing
a Cassette Tape
The longer side with the tape visible should face to the
right.
If
the ignition and the radio are on, the tape can be
inserted and will begin playing. If you hear nothing or
hear a garbled sound, the tape may not be in squarely.
Press EJECT to remove the tape and
start
over.
While the tape is playing, use the VOLUME,
FADE,
BAL, BASS and TREB controls
just
as you do for the
radio. Other controls may have different functions when
a tape is inserted. The display will show an arrow to
show which side of the tape is playing.
If
you want to insert
a
tape when the ignition or radio
is
off,
first press EJECT or RECALL.
Your tape bias is set automatically.
If
E
and a number appear on the radio display, the tape
won’t play because
of
an error.
ElO:
The tape is tight and the player can’t turn the
tape hubs. Remove the tape. Hold the tape with the
open end down and try to turn the right hub to the
left with a pencil. Turn the tape over and repeat. If
the hubs
do
not turn easily, your tape may be
damaged and should not be used in the player.
Try
a new tape
to
make sure your player is
working properly.
Ell:
The tape is broken. Try a new tape.
If any error occurs repeatedly
or
if an error can’t be
corrected, please contact your dealer.
If
your radio
displays an error number, write it down and provide it to
your dealer when reporting the problem.
PREV
(1):
Press this button to search for the previous
selection on the tape. Your tape must have at least three
seconds of silence between each selection for
PREV
to
work. The sound will mute while seeking.
3-28