Filter
Top Products
TaiVStop/Turn
Signal
Lamp
1.
Remove the three plastic wing nuts
(A).
(Pliers may
be required
to
remove the wing nuts.)
A
A
4
2.
Pull the taillamp housing away from the body
of
the
vehicle
(B).
3.
Squeeze the tab on the socket and turn the socket
right to left.
4.
Pull
out the socket.
5.
Pull the bulb
out
of
the socket. (There are two bulbs
on
each taillamp.)
6.
Push in
a
new bulb.
7.
Replace the socket into the
housing
and turn to
the right.
8.
Replace the taillamp housing to the body
of
the vehicle.
9.
Install the wing nuts.
10.
Tighten the plastic nuts.
6-33