Filter
Top Products
9.
Twist the harness slightly to route it through the
correct slot.
10.
Pull on the harness. Make sure it
is
properly routed
and isn’t twisted or flipped over.
1
1.
Repeat Steps
5
through
10
for
the other side
of
the
harness. Be sure both sides are adjusted to the same
height.
seatback. Make sure the harness goes through the
slots
in
the pad that match the height adjustment
slots being used.
12.
Move the pad back against the child restraint
13.
Press the upper edge
of
the pad against the
fastener strip.
1-40