Filter
Top Products
If
your vehicle
is
equipped
with wheel covers, be
sure
to
use a wheel wrench
to begin the process of
loosening the plastic
wheel
nut
caps.
They won’t come off.
You
will only be able to loosen
them. Once you have loosened the plastic
nut
caps with
the wheel wrench, if needed,
you
can finish loosening
them with your fingers.
Then, using the flat end of
the
wheel wrench, pry along
the edge of
the
wheel cover
until
it comes off.
Be
careful; the edge may be sharp. Don’t try to remove
the
cover with your bare hands.
Removing the Flat Tire and Installing the
Spare Tire
1.
Using the wheel wrench, loosen all
the
wheel nuts.
Don’t remove them yet.
2.
Turn the jack handle to the right to raise the jack
lift
head a few inches.
5-29