Filter
Top Products
3.
Check both sides
of
the dipstick, and read the
lower level. The fluid
level
must be in the
cross-hatched area.
4.
If the fluid level is in the acceptable range, push the
dipstick back
in
all the way.
How
to
Add
Fluid
Refer to the Maintenance Schedule to determine what
kind
of
transaxle fluid to use. See “Recommended
Fluids and Lubricants”
in
the Index.
If the fluid level is low, add only enough
of
the proper
fluid to bring the level into the cross-hatched area
on
the dipstick.
1. Pull
out
the
dipstick.
2.
Using a long-neck funnel, add enough fluid at the
dipstick hole to bring it to the proper
level.
It doesn’t take much fluid, generally less than one
pint
(0.5
L).
Dun
’t
overfill.
I
NOTICE:
I
We recommend you use only fluid labeled
DEXRON@-111, because fluid with that label
is
made especially for your automatic transaxle.
Damage caused by fluid other than DEXRON-I11
is not covered by your new vehicle warranty.
3.
After adding fluid, recheck the fluid level as
described under
“How
to Check.”
4.
When the correct fluid level
is
obtained, push the
dipstick back in all the way.
6-19