Filter
Top Products
Passenger’s Temperature Control
The PASSENGER
CONTROL
buttons with the arrows
adjust the temperature on the passenger’s side
so
it is
warmer or cooler than
the
temperature set by the driver.
Push the
DUAL
button
so
the indicator light
on
it is lit.
Press the right arrow button to raise the temperature.
Press the left arrow button to lower the temperature. The
display will not show the passenger’s side temperature,
only that of the driver. Indicators in the passenger
control section will show passenger temperature relative
to the driver’s set temperature.
0
The amber light indicates the same temperature as
set for the driver.
0
The red lights indicate a warmer temperature than
that of the driver.
0
The blue lights indicate a cooler temperature than
that of the driver.
Manual Control
If
you prefer
to
manually control the heating, cooling
and ventilation
in
your vehicle,
you
can select airflow
direction, fan speed, outside or recirculated air and air
compressor operation with the following buttons:
AIR
FLOW:
This control has several settings to
control the direction of aifflow when the system is not
in
AUTO.
To
access the various modes available, continue to press
the following four
AIR
FLOW
up and down arrows
until the desired mode appears in the display:
0
0
0
0
WINDSHIELD/FLOOR:
This setting directs half
of
the
air to the floor ducts and half
to
the defroster
and side window vents.
MID/FLOOR:
This setting directs half of the air
through the instrument panel outlets. Most of the
remaining air
is
directed through the floor ducts and
a little
to
the defroster and side window vents.
MID:
This setting directs air through the instrument
panel outlets.
FLOOR:
This setting sends most of the air through
the
ducts near
the
floor. The rest comes out
of
the
defroster and side window vents.
3-8