Filter
Top Products
Playing
a
Compact
Disc
Insert
a
disc partway into the slot, label side up. The
player will pull it in. The disc should begin playing.
If
you want
to
insert a CD while the ignition or the radio
is off, first press EJECT or RECALL.
If
you’re driving on a very rough road or if it’s very hot,
the disc may not play and an error code may appear on
the display. When things get back to normal, the disc
should play.
If
the disc comes out, it could be that:
0
E20:
The disc is upside down.
0
E20:
It is dirty, scratched or wet.
0
E20:
There’s too much moisture in the air.
(Wait about an hour and try again.)
If any error occurs repeatedly or if an error can’t be
corrected, please contact your dealer.
If
your radio
displays an error number, write it down and provide it to
your dealer when reporting the problem.
PREV
(1):
Press this button
to
go to the start
of
the
current track, if more than eight seconds have played. If
you hold the button or press it more than once,
the
player will continue moving back through the disc. The
sound will mute while seeking.
NEXT
(2):
Press this button to
go
to the next track.
If
you
hold the button or press it more than once, the
player will continue moving forward through the disc.
The sound will mute while seeking.
The SEEK down and up arrows will also find the
previous and next selections on the disc.
44
(3):
Press and hold this button to quickly reverse
within
a
track. You will hear sound.
..
(4):
Press and hold this button to quickly advance
within a track. You will hear sound.
RAND
(6):
Press this button to hear the tracks in
random, rather than sequential, order. Press RAND
again to turn off random play.
RECALL:
Press this button to see which track is
playing. Press it again within five seconds to see how
long it has been playing.
To
change what is normally
shown on the display (track or elapsed time), press the
RECALL button until you see the display you want,
then hold the RECALL button until the display flashes.
3-30