Filter
Top Products
-
8.
Start the engine and let
it
run
until
you can feel the
upper radiator hose getting hot. Watch out for the
engine fans.
9.
By
this time, the coolant level inside
the
radiator
filler neck may be lower.
If
the
level
is
lower, add
more
of
the proper
DEX-COOL@
coolant mixture
through the filler neck
until
the level reaches
the
base of
the
filler neck.
10.
Then replace the pressure cap.
At
any time during
this procedure
if
coolant begins to flow out
of
the
filler neck, reinstall
the
pressure cap. Be sure the
arrows
on
the pressure cap line up like this.
11.
Check the coolant
in
the recovery tank. The level
in
the coolant recovery tank should
be
at
the
HOT
mark when the engine
is
hot or at the
COLD
mark
when the engine
is
cold.
5-24