Filter
Top Products
2.
Lift the plastic locking tab on the electrical
connector and pull the connector from the dome
lamp assembly.
3.
Grasp
the
bulb
housing located
in
the center
of
the
assembly and pull straight
up.
4.
Pull
the bulb
out
of
the socket.
5.
Push
in
a
new bulb.
6.
Replace the socket
into
the dome lamp assembly.
7.
Reconnect the dome lamp assembly
to
the wiring
harness, making sure the connector
tab
snaps
into place.
Windshield Wiper Blade Replacement
8.
Reposition
the
dome lamp assembly to the
roof,
and
gently push the assembly into the base plate.
Replacement blades for your vehicle are
22
inches
(56
cm) in length.
1.
Turn
the wipers on to the lowest intermittent setting.
6-36