Filter
Top Products
9
MODEL 11-169 SPECIFICATIONS
Recommended Bolt Torques
NOTE: All dimensions subject to change.
BASIC CONTROL DRIVE
TYPICAL VALVE MOUNTING
71/2"
(191 mm)
1/2" N.P.T.
CONDUIT,
SIGNAL
CONNECTION
1" N.P.T.
CONDUIT,
POWER
CONNECTION
23/16"
(56 mm)
27/16"
(62 mm)
GEAR MODULE /
MOTOR ASSEMBLY
4 7/16" (113 mm)
Approximate Weight 56 lbs. (25 kg)
Maximum Overhung Load 750 lbs. (340 kg)
Model Information
Torque
Size (in.) (lb-ft) (N•m)
Cover Bolts 5/16-18 10 14
Motor/Gear Module Bolts 1/4-20 6 8
Body Bolts 5/16-18 10 14
Body Bolts 3/8-16 20 27
Control End Cover Bolts 5/16-18 10 14
Coupling Bolts 3/8-24 50* 68*
Mounting Bracket Screws 3/8-16 25 34
(Flat Head)
3/4" (19 mm) OR 1 1/2" (38 mm) DIA.
1 15/32
(37 mm)
COVER, DIGITAL
CONTROL MODULE
(ALLOW 4" (102 mm)
FOR REMOVAL
67/8"
(175 mm)
51/4"
(133 mm)
13 1/4"
(337 mm)
31/4"
(83 mm)
MOUNTING HOLES
3/8-16 UNC-2B x 1/2" (13 mm) DEEP
(4) HOLES EQUALLY SPACED
ONA5" (127 mm) DIA. B.C.
11 1/2" (292 mm) MAX.
(ALLOW 6" (152 mm)
FOR REMOVAL)
45°
COVER, POSITION
SENSING DEVICES
HANDSWITCH
COVER,
TERMINAL BLOCK
EXTERNAL WIRING
HANDWHEEL
8 1/4" (210 mm) MAX.
(ALLOW 4" (102 mm)
FOR REMOVAL)
3 7/8" (98 mm)
+.001" (.03 mm)
–.000
*May vary per application. Refer to valve mounting specification
sheet shipped with your drive.