Filter
Top Products
02 Instruments and controls
62
Rearview and door mirrors
02
Switch the compass on or off by pressing the
button set into the rear of the mirror. Use a
straightened paper clip for example. The but-
ton is countersunk approximately 2.5 cm in
the mirror.
Set the correct zone for the compass
The earth is divided into 15 magnetic zones.
The correct zone must be selected for the
compass to function correctly.
– Ignition position II.
– Press and hold the button on the rear of
the mirror for approximately 3 seconds
until
ZONE is shown (use a straightened
paper clip for example). The number for
the current area is shown.
– Press the button several times until the
number for the required geographic area
(1 –15) is shown. After several seconds the
display returns to show the compass di-
rection, this means that the change of
zone is complete.