Filter
Top Products
06 Starting and driving
119
Automatic gearbox
06
Cold start
When starting in low temperatures, the gear
changes can sometimes feel hard. This is
due to the gearbox oil’s viscosity at low tem-
peratures. To minimise engine emissions, the
gearbox shifts up later than normal when the
engine is started at low temperatures.
Turbo engine
When the engine is cold, the transmission
shifts gears at higher revs. This allows the
catalytic converter to reach normal operat-
ing temperature more quickly, with less ex-
haust emissions.
Adaptive system
The gearbox is controlled by what is known
as an adaptive system. The system continu-
ally monitors how the gearbox is behaving
and senses every gear change for optimum
change quality.
Lock-up function
The gears have a lock-up function (locked
gears), which gives better engine braking and
lower fuel consumption.
Safety systems
Cars with an automatic gearbox have special
safety systems:
Keylock
To remove the ignition key, the gear selector
must be in the P position. The key is locked
in all other positions.
Parking position (P)
Stationary car with engine running:
– Hold your foot on the brake pedal when
moving the gear selector to another posi-
tion.
Electric gear inhibitor – Shiftlock
Parking position (P position)
To be able to move the gear selector from the
P position to other gear positions, the ignition
key must be in position I or II and the brake
pedal must be depressed.
Neutral position (N position)
The brake pedal must be depressed to move
the gear selector from position N to other
gear positions when the ignition key is in
position I or II.
Mechanical gear selector inhibitor
The gear selector can be moved freely be-
tween N and D. Other positions are locked
with a latch that is released with the inhibitor
button on the gear selector.
Press the inhibitor button to move the lever
forward or back between the different gear
positions.