Filter
Top Products
05 Locks and alarm
106
Alarm (option)
05
Testing the alarm system
Testing the passenger compartment
motion sensor:
– Open all the windows.
– Activate the alarm. Alarm activation is
confirmed with a slow flash of the LED.
– Wait 30 seconds.
– Test the movement detector in the pas-
senger compartment by lifting a bag or
similar from the seat cushion. The alarm
will now sound and flash.
– Deactivate the alarm by unlocking the car
with the remote control.
Testing the doors
– Arm the alarm.
– Wait 30 seconds.
– Unlock the driver’s door with the key
blade.
– Open one of the doors. The alarm system
will sound and flash.
– Repeat the test for the other doors.
– Deactivate the alarm by unlocking the car
with the remote control.
Testing the bonnet
– Get into the car and deactivate the move-
ment detector.
– Arm the alarm (remain in the car and lock
the doors with the button on the remote
control).
– Wait 30 seconds.
– Open the bonnet with the handle under
the dashboard. The alarm will now sound
and flash.
– Deactivate the alarm by unlocking the car
with the remote control.
Testing the boot lid:
– Arm the alarm.
– Wait 30 seconds.
– Unlock with the key on the driver’s side
without opening any of the doors.
– Open the boot lid with the handle. The
alarm will now sound and flash.
– Deactivate the alarm by unlocking the car
with the remote control.