Filter
Top Products
09 Maintenance and service
191
Replacing bulbs
09
Direction indicator, right-hand side
– Switch off all lights and turn the ignition
key to position 0.
– Remove the radiator hose (1) from the
radiator.
– Remove the screw (2) to the filler pipe.
– Pull the pipe (3) straight up.
– Remove the ventilation hose (4) from the
pipe.
– Replace the bulb.
– Check that the washer fluid reservoir gas-
ket between the filler pipe and the holder
is properly secured.
– Put the filler pipe (3) back into place.
– Refit the ventilation hose onto the filler
pipe (4).
– Screw in the screw (2) to the filler pipe and
refit the radiator hose to the radiator (1).
Side marker lamps
– Turn the bulb holder clockwise and pull it
out.
– Replace the bulb.
– Refit the bulb holder by turning it anti-
clockwise.