Filter
Top Products
09 Maintenance and service
192
Replacing bulbs
09
Front fog lamps (option)
To remove the bulb
– Switch off all lights and turn the ignition
key to position 0.
– Turn the bulb holder slightly anticlockwise.
– Pull out and remove the bulb.
To fit
– Fit the new bulb. In can only be positioned
one way.
– Refit the bulb holder, turn it clockwise
slightly. The "TOP" mark must be upward.
Cargo area
– Insert a screwdriver and gently turn so that
the lamp housing comes loose.
– Remove the bulb.
–Fit a new bulb.
– Refit the lamp housing.
Number plate lighting
– Switch off all lights and turn the ignition
key to position 0.
– Remove the screw with a screwdriver.
– Carefully remove the entire lamp housing
and pull it out. Turn the contact anticlock-
wise and pull out the bulb.
– Fit the new bulb.
– Plug in the connector and turn it clockwise
in the lamp housing.
– Refit the entire lamp housing and screw it
into place.