Filter
Top Products
09 Maintenance and service
187
Battery
09
– Detach the lower console holding the bat-
tery.
– Bend aside the plastic cover and discon-
nect the positive cable.
– Undo the evacuation hose.
– Remove the battery.
Fitting the battery
– Fit the battery into position.
– Position the lower console and screw it in
place.
– Connect the positive cable, press in and
fold down the plastic cover.
– Connect the negative cable, fold down the
plastic cover.
– Fit the plastic cover or the cover over the
battery.
– Make sure the evacuation hose is correct-
ly connected to both the battery and the
outlet in the bodywork.
– Fit the lock brace over the battery and
tighten the screws.