Filter
Top Products
02 Instruments and controls
58
Power windows
02
Operating
The power windows are operated using the
controls in the doors. The ignition key must
be in position I and II for the power windows
to operate. The windows continue to work
when the car is stopped and ignition key re-
moved, provided none of the doors is
opened. Operate the windows with caution.
To open a window:
– Depress the front of the control.
To close a window:
– Raise the front of the control.
Driver’s door
Controls, power windows. A. Front B. Rear.
The driver can operate all power windows
from the driver’s seat.
The windows can be opened and closed in
two ways:
Manual operation
– Depress one of the controls (A) or (B) gen-
tly or raise it gently. The power window
opens or closes as long as the switch is
actuated.
Automatic operation
– Fully depress one of the controls (A) or (B)
or raise it fully, then release. The side
window will then open or close automati-
cally. If the window is obstructed by an
object, the movement will stop.
WARNING
Make sure that children and other passen-
gers cannot be trapped in any way when
closing the windows. Pay close attention if
the rear door windows are controlled from
the driver’s door or if the windows are
closed with the remote control.
WARNING
The function that interrupts the movement
of the windows in the event of blocking
works only with automatic closing, not with
manual.
WARNING
If there are children in the car:
Remember to switch off the supply to the
power windows by removing the ignition
key if the driver leaves the car.
Make sure that children and other passen-
gers cannot be trapped in any way when
closing the windows.