Filter
Top Products
Trip/Fuel Menu Items
Press 3 to scroll through the
following menu items:
• Speedometer
• UNITS
• Tire Pressure
• Customize Options
• Odometer/Trip Odometer
• Distance/Time To Go
• Range
• Avg (Average)Speed/Avg
(Average) Fuel
• OverSpeed
Speedometer
Press
3 until the speedometer
is displayed.
The speedometer shows how fast
the vehicle is moving in either miles
per hour (MPH) or kilometers per
hour (km/h). To switch between
English and metric measurements,
see “UNITS” later in this section.
The digital speedometer display can
be enabled or disabled. See “Digital
Speedometer” under DIC Vehicle
Customization on page 4-31 for more
information.
UNITS
Move the thumbwheel up
Q or
down
Rto highlight English or Metric
when the UNITS display is active.
Press
8 to confirm the setting.
This will change the displays on the
cluster, DIC, and the temperature
display in the mirror to either English
or metric measurements.
Tire Pressure
Press
3 until Tire Pressure is
displayed.
The display will show a vehicle and
the approximate pressures of all four
tires. Tire pressure is displayed in
either pounds per square inch (PSI)
or in kilopascal (kPa).
This display can be customized.
See DIC Vehicle Customization on
page 4-31 for more information.
Customize Options
See DIC Vehicle Customization on
page 4-31 for more information.
Odometer/Trip Odometer
Press
3 until the Odometer/Trip
Odometer is displayed.
The odometer display shows the
distance the vehicle has been
driven in either miles (MI) or
kilometers (km). To switch between
English and metric measurements,
see “UNITS” earlier in this section.
The Trip Odometer display shows
the current distance traveled since
the last reset for the trip odometer.
The trip odometer can be reset to
zero by pressing and holding
8
while the trip odometer value is
highlighted. If
8 is only pressed
briefly, the Avg Speed/Avg Fuel
will be reset as well.
Instruments and Controls 4-23