Filter
Top Products
Preset 1: Default setting 30 MPH
(48 km/h)
Preset 2: Default setting 45 MPH
(72 km/h)
Preset 3: Default setting 55 MPH
(89 km/h)
Preset 4: Default setting 70 MPH
(113 km/h)
The selection is set automatically
after a few seconds.
The corresponding value of the
presets will be shown on the display.
The preset OverSpeed warnings
can be reprogrammed. See
“Programming the OverSpeed
Presets” later in this section.
Manual OverSpeed
To manually set the OverSpeed
warning:
1. Use the thumbwheel to select
Manual for OverSpeed.
2. Press
8 to highlight the current
value.
3. Use the thumbwheel to adjust
the value in 5 MPH or km/h
increments and press 8
to confirm the setting.
To set the OverSpeed warning to
the vehicle’s current speed:
1. Use the thumbwheel to select
Manual as described in the
OverSpeed section.
2. Press
8 to highlight the current
value.
3. Press and hold
8 for more than
3 seconds to set the value to the
nearest 5 MPH or km/h above the
current vehicle’s speed.
Programming the OverSpeed
Presets
While the vehicle’s speed is 6 MPH
(10 km/h) or below, each of the
presets can be altered and values
can be stored for future use.
To reprogram the OverSpeed
presets:
1. Use the thumbwheel to select the
desired preset and press
8.
2. Move the thumbwheel up
Q or
down
R to adjust the value in
1km/h increments.
3. Press
8 to confirm the setting.
Instruments and Controls 4-25