Polaris SL2 Automobile User Manual


 
78
CLEANING AND STORAGE
Cleaning Products
This section provides tips on the very best way to clean, polish and preserve every surface of
your beautiful new SLINGSHOT vehicle. We recommend the use of Polaris Engineered
Vehicle Care cleaning and polishing products to offer the best care for your vehicle. After
cleaning the vehicle, inspect for damage to the painted surfaces. Repair chips or scratches
promptly by applying touch-up paint to prevent corrosion.
For more information, or for answers to your cleaning and detailing questions, please see
your SLINGSHOT dealer.
Washing the Vehicle
NOTICE: Do not use pressurized water to wash the SLINGSHOT vehicle. Water may seep in and
deteriorate wheel bearings, brake caliper assemblies, electrical connectors and
transmission seals. Do not direct any water stream at air intakes, exhaust outlets, the
radiator, the rider compartment or electrical components.
1. Do not use abrasive cleaners.
2. Rinse off as much dirt and debris as possible with water running at low pressure. Use as
little water as possible when washing near the air intake or the exhaust pipe openings.
Dry these components thoroughly before using the vehicle.
3. Make sure the brakes are functioning properly before riding.