Polaris SL2 Automobile User Manual


 
40
OPERATION
NOTICE: Failure to operate the vehicle properly can result in a collision, loss of control, accident or
rollover, which may result in serious injury or death. Read and understand all safety
warnings outlined in the safety section of this owner’s manual. See pages 7-15.
Break-In Period
The break-in period for your vehicle is the first 500 miles (800 km) of operation. During this
break-in period, critical engine parts require special wear-in procedures so they seat and
mate properly. Read, understand and follow all break-in procedures to ensure the long-term
performance and durability of your engine.
Engine and Drivetrain Break-in
NOTICE: Failure to properly follow the engine break-in procedures outlined in this manual can result
in serious damage to the engine. Follow all break-in procedures carefully. Avoid full-throttle
operation and other conditions that may place an excessive load on the engine during the
break-in period.
1. Fill the fuel tank with gasoline. Heed the fuel warnings on page 12.
2. Check the oil level. See page 52. Add the recommended oil as needed to maintain the oil
level between the safe and add marks.
3. Vary speed. Do not drive at a constant speed, whether fast or slow. Do not drive at
sustained idle.
4. Avoid full-throttle starts and do not drive at full throttle.
5. Do not exceed 70 MPH (113 km/h).
6. Avoid the use of downshifting to brake or slow the vehicle.
7. Avoid making hard stops for the first 200 miles (322 km).
8. Perform regular checks on fluid levels, controls and areas outlined on the daily pre-ride
inspection checklist. See page 36.
9. Change both the engine oil and filter at 500 miles (800 km).
WARNING