Filter
Top Products
117
AUDIO SYSTEM
Audio Mode Menus
Entering Mode Menu
1. Press and hold MODE until the system enters the audio system mode menus.
2. Press and release
MODE to cycle through the following menu items, shown in order of
display:
• Audio Output Select
• Helmet Equalizer
•Bass
•Mid
• Treble
• Fader
• Automatic Volume Control (AVC)
• Bluetooth Setup
• Bluetooth Driver Device
•NAV Audio
• iPod Music Settings
• FM/AM Tuner Clear Presets
• Radio Broadcast Data System (RBDS)
3. At the RBDS screen, press and release MODE to return to the beginning of the mode
menu list.
Exiting Mode Menu
Exit the screen and return to the default display in one of two ways:
1. Wait 10 seconds. The system will automatically exit.
2. Press PRESET to exit if not in Bluetooth Setup Mode.
Audio Output Select
Use the audio output select menu to direct the audio
output to either the external speakers or headsets.
• Speakers
• Headsets
1. Press TUNE+ or TUNE- to adjust.
2. Press and release MODE to move to the next
selection.
Helmet Equalizer
Press TUNE+ or TUNE- to select ON or OFF.
Press and release
MODE to move to next selection.
Bass Setting
Press TUNE+ or TUNE- to adjust.
Press and release MODE to move to next selection.
ON: Audio is optimized for full-face helmet
OFF: Audio is optimized for half-helmet