Polaris SL2 Automobile User Manual


 
21
FEATURES AND CONTROLS
Console and Switches
Mode Button
Use the mode button to toggle through the modes of the multi-function display. See page 24.
Use the mode button to set the display units to either standard or metric units of
measurement. See page 25.
Electronic Stability Program (ESP) Switch
The ESP is active by default. This feature helps reduce the risk of accident by providing
traction control and stability control. If ESP senses a loss of stability due to loss of traction
(skidding) the ESP intervenes by automatically applying brakes to one or more wheels and
reducing power to the rear wheel.
WARNING! No stability control, traction control or anti-lock braking system can fully protect you from
every situation. Always be mindful of road conditions. Always drive safely and within the limits of the
driver, vehicle and road conditions.
WARNING! Stability control, traction control and anti-lock braking systems rely on grip between the
tires and the road to function properly. In a hydroplane situation, tires lose contact with the road and the
effectiveness of these features may be diminished.
The electronic stability control system does not compensate for or reduce the risks associated
with:
excessive speed
reduced traction on rough, uneven or loose surfaces
poor judgment
improper operation
hydroplaning
Under certain circumstances, such as when the vehicle is stuck in a low traction situation, it
may be necessary to disable the ESP temporarily. Always enable the ESP for normal
operation.
WARNING! Operating the vehicle under normal riding conditions with the ESP disabled could result in
an increased risk of loss of vehicle control, rollover, personal injury and death.
ESP Switch Operation
Objective Action Comments
Disable Traction Control Press and release switch Traction Control indicator
illuminates in tachometer
Disable ESP (Traction Control
and Stability Control)
Press and hold switch for 5
seconds
Traction Control indicator and ESP
OFF indicator illuminate in
tachometer
Enable ESP (if disabled) Press and release switch Traction Control indicator and ESP
OFF indicator extinguish