27
FEATURES AND CONTROLS
Starter Interlock Switch
The starter interlock switch prevents the electric starter from operating when the clutch is
engaged (pedal released). Read the engine starting procedures beginning on page 42 before
starting the engine.
WARNING! Never start the engine with the transmission in gear and the clutch disengaged unless you
are properly seated with helmet on, seat belt secured and brakes applied.
Electronic Power-Assisted Steering (EPAS)
Electronic power-assisted steering engages when the ignition key is turned to the ON
position. EPAS remains engaged whether the vehicle is moving or idle.
To conserve battery power, the EPAS will shut down 5 minutes after the engine is stopped if
the key remains in the ON position. The EPAS warning indicator will illuminate to indicate
the EPAS has shut down. Turn the key off and on to reset the unit.
See page 23 for EPAS warning indicator information.
Foot Controls (Foot Pedals)
Throttle Pedal
Depress the throttle pedal to increase engine
speed and (when the transmission is in gear)
vehicle speed. Spring pressure returns the pedal
to the rest position when released. Always check
that the throttle pedal returns normally before
starting the engine.
Brake Pedal
Depress the brake pedal to slow or stop the
vehicle. Apply the brakes while starting the
engine.
NOTE: The SLINGSHOT brakes are not power-
assisted. Braking the SLINGSHOT may feel
different than braking other types of vehicles.
Practice braking in a safe area to become
familiar with the feel of the SLINGSHOT
brakes before driving in traffic.
Clutch Pedal
Depress the clutch pedal (disengage the clutch) before shifting gears. For smooth clutch
operation, depress the pedal quickly and release it gradually.
• To disengage the clutch, press the pedal toward the floor.
• To engage the clutch, gradually release the clutch pedal.
Clutch
Pedal
Brake
Pedal
Throttle
Pedal