Polaris SL2 Automobile User Manual


 
41
OPERATION
Fuel Recommendation
Use only unleaded gasoline with a 91 pump octane minimum and a maximum ethanol
content of 10%. DO NOT USE E-85 GASOLINE OR GASOLINE CONTAINING
METHANOL. Using E85 or gasoline/methanol blends can result in poor starting and
driveability, and may damage critical fuel system components.
NOTICE: Use of fuel other than the recommended fuel could result in voiding of your warranty.
Review the fuel warnings. See page 12. Use only the recommended fuel.
1. Insert the fuel nozzle into the fuel tank filler neck. Do not leave the nozzle unattended
while fueling.
2. Fill the fuel tank until the pump stops. Do not overfill.
WARNING! Fuel expands in the fuel tank. To prevent leaks, make sure the fuel filler cap is properly
seated. Do not overfill.
NOTICE: Fuel can damage painted surfaces and plastic parts. If gasoline spills on the any part of the
vehicle, immediately rinse it off with water or wipe it dry with a clean cloth.
Priming the Fuel System
If the vehicle runs out of fuel, prime the fuel system before attempting to restart the engine.
1. Fill the fuel tank.
2. Turn the ignition key to the ON position.
3. Allow the fuel pump to run until it stops (about 5 seconds).
4. Turn the key to the OFF position and wait 10 seconds.
5. Repeat steps 2-4 three more times, then start the engine. See page 42.