Filter
Top Products
129
AUDIO SYSTEM
Screen Display Settings
The screen display diagnostic menu allows the following actions for you or your
SLINGSHOT dealer:
• Adjust backlighting
• Set DAY/NIGHT/AUTO mode
• Adjust button display modes
1. To access the display settings, press and hold MUTE.
2. Press VOL+ to display software information.
3. Press VOL+ to return to the display settings screen.
4. Press MODE to save any changes and exit.
Backlighting Display Settings
1. Press and release TUNE+ to cycle
through DAY/NIGHT/AUTO modes.
2. Press and release TUNE- or PRESET
to adjust the screen brightness in each
mode.
3. With Auto mode on, press MUTE or
PHONE to adjust the DAY/NIGHT
light transition point.
Button Display Settings
Press VOL- to scroll through button display modes:
OFF: Button text does not display on screen
ON: Button text displays on screen at all times
ON NIGHT: Button text displays at all times in NIGHT MODE only
SLIDE: Button text slides out to display when any button is pressed
SLIDE NIGHT: Button text slides out to display in NIGHT MODE only