Initial Settings
En
81
Initial settings menu
The initial settings menu has the following func-
tions:
Note
• DAB P. is displayed only when a separately
sold hide-away DAB tuner (e.g., GEX-
P700DAB) is connected.
Initial settings menu operation
You can operate the initial settings menu only
when the source is off.
1 Press and hold SOURCE to turn the source
off.
2 Press and hold 1 to enter the initial
settings menu.
• When the source is off, you can check the
location of “1” by turning on the feature demo.
Note
• Press BAND/ESC to cancel the initial settings
menu.
Using reverse mode
If you do not carry out an operation within about
30 seconds, screen indications will start to
reverse, and then continue reversing every 10
seconds.
You can turn the reverse mode on or off.
1 With the source turned off, press and hold
1 to select the reverse mode.
2 Press REV to turn the reverse mode on.
ON appears in the display.
• Press REV again to turn the reverse mode off.
Using the feature demo
The feature demo automatically starts when
power to this product is switched off while the
ignition switch is set to ACC or ON.
You can turn the feature demo on or off.
1 With the source turned off, press and hold
1.
2 Press F.DEMO to select the feature demo
mode.
3 Press F.DEMO to turn the feature demo on.
ON appears in the display.
• Press F.DEMO again to turn the feature demo
off.
Note
• The red lead (ACC) of this product should be
connected to a terminal coupled with ignition
switch ON/OFF operations. If this is not done,
the vehicle battery may be drained.
English
Español
Deutsch
Français
Italiano
Nederlands
11
Section