Multi-CD Player
Using ITS memory
The ITS (instant track selection) lets you make a
program of favorite tracks from those in the
multi-CD player magazine. After you have added
your favorite tracks to the ITS memory, you can
turn on ITS play and play just those selections.
Programming tracks in ITS memory
You can use ITS to enter and playback up to 99
tracks per disc, up to 100 discs (with the disc
title). (With multi-CD players sold before the
CDX-P1250 and CDX-P650, up to 24 tracks can
be stored in the playlist.)
1 Press 5 or ∞ to play the CD you want to
program.
2 Press FUNC and NEXT and then press ITS.M
to select the ITS memory mode.
3 Press 2 or 3 to select the desired track.
4 Press MEMO to store the currently playing
track in the ITS memory.
“Memory complete” is displayed briefly and the
currently playing track is added to ITS memory.
5 Press BAND/ESC to cancel the ITS memory
mode.
Notes
• In this mode, you can also use 5 to store the
currently playing track in the ITS memory.
• After 100 discs have been programmed, the
data for a new disc will overwrite the oldest
one.
Playback from ITS memory
ITS play lets you listen to the tracks that you
have entered into ITS memory. When you turn
on ITS play, tracks from ITS memory in the
multi-CD player will begin to play.
1 Select the repeat range.
Refer to Repeating play on page 61.
2 Press FUNC and NEXT and then press
ITS.P to select the ITS play mode.
3 Press ITS.P to turn ITS play on.
The light illuminates. Playback begins of those
tracks from ITS memory within the selected
repeat range: multi-CD player repeat or disc
repeat.
• Press ITS.P again to turn ITS play off.
• When the ITS play mode is exited while ITS
play is on, “ITS” appears on the basic display.
Note
• If no track in the current play range is pro-
grammed for ITS play, “ITS empty” is
displayed.
En
66
07
Section