Filter
Top Products
10
Section
En
76
Audio Adjustments
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list of
the equalizer curves:
1 Press EEQ to switch to the easy equalizer
mode.
2 Press NEXT to switch between “CSTM2”
and the other selections (curves).
3 Press the corresponding button to select
the desired equalizer curve.
Button Equalizer curve
FLAT Flat
S.BASS Super bass
PWRFL Powerful
NATRL Natural
VOCAL Vocal
CSTM1 Custom1
CSTM2 Custom2
• CSTM1 and CSTM2 are adjusted equalizer
curves.
• A separate CSTM1 curve can be created for
each source. (The Built-in CD player and Multi-
CD player are set to the same Equalizer Curve
Adjustment setting automatically when using
the AVH-P6400CD.)
• If you make adjustments when a curve other
than CSTM2 is selected, the equalizer curve
settings are memorized in CSTM1.
• A CSTM2 curve can be created common to all
sources.
• If you make adjustments when the CSTM2
curve is selected, the CSTM2 curve is updated.
• When
FLAT is selected no supplement or
correction is made to the sound. This is useful
to check the effect of the equalizer curves by
switching alternatively between FLAT and a set
equalizer curve.
Notes
• You can also use 2 and 3 to select the
desired equalizer curve.
• If you do not operate the function within about
eight seconds, the display is automatically
returned.
Audio menu
The audio menu has the following functions:
Notes
• If you do not operate the function within about
30 seconds, the display is automatically
returned.
•“SW2” is displayed only when the subwoofer
output is on in the subwoofer output mode
(SW1).
•“SLA” is not displayed when you select FM
tuner as the source.