Multi-CD Player
En
63
Selecting tracks from the track
title list
The track title list lets you see the list of track
titles on a CD TEXT disc and select one of them
for playback.
1 Press FUNC and then press T.LIST to select
the track title list mode.
2 Press NEXT to display the desired track
title.
Press NEXT until the desired track title appears.
3 Press the corresponding number button to
select the desired track title.
That selection will begin to play.
Notes
• You can also use 2, 3 and 5 to select and
play the desired track title.
• Only when playing a CD TEXT disc on a CD
TEXT compatible multi-CD player, you can
switch to this mode.
Selecting discs from the disc title
list
The disc title list lets you see the list of disc titles
and select one of them for playback. Displayed
disc titles are those which have been entered
into the multi-CD player or recorded on a CD
TEXT disc.
1 Press FUNC and then press D.LIST to select
the disc title list mode.
2 Press NEXT to switch between “1” – “6”
and “7” – “12”.
3 Press any of the buttons 1 – 6 (or 7 – 12) to
select the desired disc title.
That selection will begin to play.
Notes
• You can also use 2, 3 and 5 to select and
play the desired disc title.
•“No D.Title” is displayed for a disc whose title
has not been input.
•“No disc” is displayed next to the disc number
when no disc is set in the magazine.
• You cannot display “7” – “12” when a 6-disc
multi-CD player is connected.
English
Español
Deutsch
Français
Italiano
Nederlands
07
Section