Filter
Top Products
Multi-CD Player
En
59
Display and indicators
23 5 1
46
1 Source name
2 Disc number
3 Track number
4 Disc title
5 Play time
6 Track title
50-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.
Basic operation
This product can control a multi-CD player,
which is sold separately.
1 Press SOURCE to select the multi-CD
player.
Press SOURCE until “Multi-CD” appears.
2 Raise or lower the volume.
Rolling the VOLUME changes the volume level.
3 Press 5 or ∞ to select a disc.
A disc number for which there is no disc will be
skipped.
• You can use the buttons 1 – 6 (or 7 – 12) to
select a disc directly.
4 Press 2 or 3 to select a track.
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
• If you press and hold 2 or 3, you can perform
fast forward or reverse.
Notes
• When the multi-CD player is performing the
preparatory operations, “Ready” is displayed.
• If the multi-CD player cannot operate properly,
an error message such as “ERROR-14” is
displayed. Refer to the multi-CD player
owner’s manual.
• If there are no discs in the multi-CD player
magazine, “No disc” is displayed.
• After choosing your destination, press
SOURCE and you can listen to the guide voice
during navigation guidance.
English
Español
Deutsch
Français
Italiano
Nederlands
07
Section