Filter
Top Products
Multi-CD Player
Pausing CD playback
Pause lets you temporarily stop playback of the
CD.
1 Press FUNC and then press PAUSE to select
the pause mode.
2 Press PAUSE to turn pause on.
The light illuminates. Play of the current track
pauses.
• Press PAUSE again to turn pause off.
• When the pause mode is exited while pause is
on, “PAUSE” is displayed in the basic display.
Note
• You can also turn pause on or off by pressing
PAUSE in the following display.
Entering disc titles
Disc title input lets you input up to 100 CD titles
up to 10 letters long (with ITS memory) into the
multi-CD player. If you input a CD title, the
entered title is displayed.
1 Press 5 or ∞ to play a disc you want to
enter the title.
2 Press FUNC and NEXT and then press TTLin
to select the disc title input mode.
3 Press ABC to switch the character mode.
Press ABC repeatedly to switch between the
following modes:
Alphabet (upper case), numbers and symbols
— Alphabet (lower case) — European letters,
such as those with accents (e.g. á, à, ä, ç)
• Press 012 to switch to the numbers and sym-
bols mode.
4 Press 5 or ∞ to select letters, numbers and
symbols.
• To insert a space, select the flashing cursor
“_”.
5 Press 3 to move the cursor to the next
character position.
• Press 2 to move backwards in the display.
En
64
07
Section