Pioneer ANH-P9R-BK GPS Receiver User Manual


 
RDS
Using radio text
This tuner can display radio text data transmit-
ted by RDS stations, such as station informa-
tion, the name of the currently broadcast song
and the name of the artist.
Notes
When radio text is received, the TXT indica-
tor lights.
The tuner automatically memorizes the three
latest radio text broadcasts received, replac-
ing text from the least recent reception with
new text when it is received.
If you do not perform an operation within 30
seconds, the radio text mode is canceled.
Displaying the radio text
1 Press NEXT to display R.TEXT.
Press NEXT until R.TEXT appears.
2 Press R.TEXT to switch to the radio text
mode.
3 Press 2 or 3 to recall the three latest radio
text broadcasts from the tuners memory.
Pressing 2 or 3 switches between the four
radio text data displays.
Notes
Press BAND/ESC to cancel the radio text
mode.
When no radio text is currently being
received, No text is displayed.
If there is no radio text data stored in the
tuner, 2 or 3 does not operate.
Storing radio text
You can store data from up to six radio text
transmissions under the buttons MEMO1
MEMO6.
1 Select the radio text you want to store in
memory.
Refer to Displaying the radio text on this page.
2 Press and hold any of the buttons MEMO1
MEMO6 until RT memo appears to store the
desired radio text.
The radio text is stored in memory under the
selected button.
Recalling preset radio text
1 Press NEXT to display R.TEXT.
Press NEXT until R.TEXT appears.
2 Press R.TEXT to switch to the radio text
mode.
3 Press any of the buttons MEMO1 MEMO6
to recall the radio text preset under that but-
ton.
En
54
05
Section