Filter
Top Products
05
Section
RDS
En
51
English
Español
Deutsch
Français
Italiano
Nederlands
• Only TP or enhanced other network’s TP sta-
tions are tuned in during seek tuning when
the “3TRFC” or “T” indicator is on.
• Only TP or enhanced other network’s TP sta-
tions are stored by BSM when the “3TRFC” or
“T” indicator is on.
Canceling traffic announcements
• Press TA while a traffic announcement is
being received to cancel the announcement
and return to the original source.
The announcement is canceled but the tuner
remains in the TA mode until TA is pressed
again.
Adjusting the TA volume
When a traffic announcement begins, the vol-
ume adjusts automatically to a preset level to
enable you to hear the announcement clearly.
• Tu r n VOLUME to adjust and set the volume
during reception of a traffic announcement.
The newly set volume is stored in memory and
recalled for subsequent traffic announcements.
TP alarm
About 30 seconds after the “3TRFC” indicator
turns to “T” due to a weak signal, a five second
beep sounds to remind you to select another TP
or enhanced other network’s TP station.
• When listening to a RDS broadcast, press 2
or 3 to tune in to another TP station or
enhanced other network’s TP station.
In sources other than the tuner, the tuner auto-
matically seeks out the TP station with the
strongest signal in the current area 10 (or 30)*
seconds after the “3TRFC” indicator turns to
“T”.
* Time taken before seek begins
TA function ON 10 seconds
TA, AF functions ON 30 seconds