Filter
Top Products
Navigation
En
41
English
Español
Deutsch
Français
Italiano
Nederlands
03
Section
System settings
In the main navigation menu, press the BACK
button.
The system settings menu is requested.
Selection from
TIME,
SAVE POSITION,
LANGUAGE*,
MEASURING UNIT,
ANNOUNCEMENT ETA,
ETA CALCULATION,
can be made by turning, and confirmed by
pressing the NAVI/OK button.
• TIME
The internal system clock can be set to local
time.
• SAVE POSITION
The current position can be saved and stored in
the destination memory.
• LANGUAGE*
Language setting for the navigation system.
• MEASURING UNIT
The display units can be changed from metres
to yards.
• ANNOUNCEMENT ETA
Announcement of the estimated time of arrival
can be switched on / off.
• ETA CALCULATION
This setting controls the estimated average
speed when driving on a motorway.
Setting the time
In order to achieve correct navigation on routes
requiring guidance under time restrictions and
to calculate the estimated time of arrival, it is
necessary to set the GMT time transmitted from
satellites to the current time zone.
Select TIME in the system settings menu and
confirm.
Using the multifunction button or
the time can be changed from the 24 hour to the
12 hour display.