DAB Tuner
En
71
Storing a dynamic label
You can store data from up to six dynamic label
transmissions under the buttons MEMO1 –
MEMO6.
1 Select the dynamic label you want to store
in memory.
Refer to Displaying dynamic labels on page 70.
2 Press and hold any of the buttons MEMO1 –
MEMO6 until “DAB memo” appears to store
the desired dynamic label.
The dynamic label is stored in memory under
the selected button.
Recalling a dynamic label
1 Press NEXT to display “D.TEXT”.
Press NEXT until “D.TEXT” appears.
2 Press D.TEXT to switch to the dynamic
label mode.
3 Press any of the buttons MEMO1 – MEMO6
to recall the dynamic label preset under that
button.
DAB tuner function menu
The DAB tuner function menu has the following
functions:
1 AS (announcement support)
For operation of the announcement support,
refer to Setting the announcement support
interruption on page 72.
2 chLIST (preset service list)
For operation of the preset service list, refer
to Selecting services from the preset service
list on page 72.
3 S.LIST (available service list)
For operation of the available service list,
refer to Selecting services from the available
service list on page 72.
4 PTY (available PTY search)
For operation of the available PTY search,
refer to Searching the available PTY on
page 73.
5 P/2ND (primary/secondary)
Press P/2ND repeatedly to switch to the next
service component.
6 SF (service follow)
Press SF repeatedly to turn SF on or off.
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned.
qwerty
English
Español
Deutsch
Français
Italiano
Nederlands
08
Section