Pioneer ANH-P9R-BK GPS Receiver User Manual


 
Tuner
En
45
English
Español
Deutsch
Français
Italiano
Nederlands
04
Section
Display and indicators
42361
5
1 Band
2 AF indicator
3 LOC indicator
4 Preset number
5 Frequency
6 Stereo indicator
Basic operation
This products AF function can be switched on
and off. AF should be switched off for normal
tuning operations. (Refer to page 49.)
1 Press SOURCE to select the tuner.
Press SOURCE until Tuner appears.
2 Raise or lower the volume.
Rolling the VOLUME changes the volume level.
3 Press BAND/ESC to select the desired band.
Press BAND/ESC repeatedly to switch between
the following bands:
FM-1 FM-2 FM-3 MW/LW
4 Press 2 or 3 to tune in to a station.
The frequencies move up or down step by step.
If you press and hold 2 or 3 for about one
second and release, you can perform seek tun-
ing. Seek tuning lets you skip broadcasting
stations until a broadcast strong enough for
good reception is found.
If you press and hold 2 or 3, you can skip
broadcasting stations. Seek tuning starts as
soon as you release the button.
Notes
The stereo indicator lights when a stereo
station is selected.
After choosing your destination, press
SOURCE and you can listen to the guide voice
during navigation guidance.
When new traffic information arrives,
appears. If desired, check the new informa-
tion.