Filter
Top Products
Black plate (93,1)
Model "NAV2-N" EDITED: 2009/ 7/ 17
AVAILABLE SETTING ITEMS
. Start:
Sets the destination. If the route is already
set, the location becomes the new destina-
tion, and the route is recalculated.
. Route Detai ls:
Allows you to change the route search
conditions or to check the route information.
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
. Move Dest.:
Displays a map screen where you can adjust
the location of the destination.
. Add to Route:
Allows you to add a waypoint to the route
already set.
. Store Dest.:
Allows you to store the location in the
Address Book.
. POI Info.:
Allows you to view information about the
facility that you have set as the destination if
it is included in the map data.
ADJUSTING THE LOCATION OF THE
DESTINATION
You can adjust the location of the destination by
moving the cross pointer across the map.
1. Set the destination using an appropriate
method.
2. Highlight [Move Dest.] and push <ENTER>.
3. Adjust the location by moving the cross
pointer across the map and push
<ENTER>. The location of the destination
is modified.
INFO:
. Touching the map screen displayed on the
right side of the screen also changes to the
screen for adjusting the location.
. The map scale can be changed by pushing
<ZOOM IN> or <ZOOM OUT>. Touching
the scale icon can also be used to change
the map scale.
. Even if you touch the map screen or operate
the directional buttons other than the up or
down button, the same map screen as when
[Move Dest.] is selected is displayed.
Setting a destination 4-25