Filter
Top Products
Black plate (118,1)
Model "NAV2-N" EDITED: 2009/ 7/ 17
Set average speeds
You can calculate the required time to the
destination based on the set vehicle speeds.
Basic operation:
1. Push <ROUTE>.
2. Highlight [Guidance Settings] and push
<ENTER>.
3. Highlight [Set Average Speeds] and push
<ENTER>.
4. Highlight the preferred item and push
<ENTER>.
5. Use the main directional buttons or the
center dial to make an adjustment. The
speed can be increased/decreased by 5
MPH (5 km/h).
6. After finishing the setting, push <ENTER>
or <BACK> to activate the setting.
7. Push <BACK> to return to the previous
scre en. Push <MAP> to return to the
current location map screen.
Available setting items:
. Auto:
If set to ON, the system automatically
calculates the required time to the destina-
tion, the indicator illuminates and the speed
settings cannot be changed.
. Freeway:
Allows you to adjust the average vehicle
speed on a freeway by moving the main
directional buttons or the center dial in the
direction of [+] or [−].
. Main Road:
Allows you to adjust the average vehicle
speed on a main road by moving the main
directional buttons or the center dial in the
direction of [+] or [−].
. Town Road:
Allows you to adjust the average vehicle
speed on a town road by moving the main
directional buttons or the center dial in the
direction of [+] or [−].
. Residential:
Allows you to adjust the average vehicle
speed in a residential area by moving the
main directional buttons or the center dial in
the direction of [+] or [−].
. Reset:
Sets the average vehicle speeds to the
default values.
5-22 Route guidance