Filter
Top Products
Black plate (168,1)
Model "NAV2-N" EDITED: 2009/ 7/ 17
when the beep function is set to on. The
beep that sounds when pushing and holding
a button or when a prohibited operation is
performed cannot be set to off.
INFO:
For more details about [Ringer Vol.], [Incoming
Call] and [Outgoing Call], refer to the vehicle
Owner’s Manual.
This allows you to change the clock settings.
BASIC OPERATION
1. Push <SETTING>.
2. Highlight [Clock] and push <ENTER>.
3. Highlight the preferred adjustment item and
push <ENTER>.
4. Use the main directional buttons or the
center dial to adjust to the preferred setting.
Push <ENTER> to set ON/OFF.
5. After setting, push <ENTER> or <BACK>
to apply the setting.
6. Push <BACK> to return to the previous
scre en. Push <MAP> to return to the
current location map screen.
Setting items
. On-screen Clock:
Select to toggle the clock display located in
the top right corner of the display between
on and off. The indicator light illuminates
when the clock display is set to on.
. Clock Format:
Use the main directional buttons or the
center dial to change the clock format
between 12-hour and 24-hour.
. Offset Adjust:
Use the main directional buttons or the
center dial to adjust the offset value
(between −59 and +59).
. Daylight Saving Time:
Select to toggle the daylight saving time
setting between on and off. The indicator
light illuminates when the daylight saving
time setting is set to on.
. Time Zone:
Select an appropriate time zone from the list
that appears when you select this item.
— Pacific
— Mountain
— Central
— Eastern
— Atlantic
CLOCK SETTINGS
8-10 Other settings